Conical seat to Ball seat Adapter
$17.00 – $21.00
- Converts 60 degree conical seat nuts to R13 ball seat
- Can be used with all Motorsport Hardware standard conical and extended race nuts
- Can be used with all thread sizes: 12×1.5, 14×1.5, and 14×1.25
- Inserts between wheel and conical nut
- Manufactuered from hardended steel
- Zinc plated
Conical seat to Ball seat adapter
Each kit consists comes with 16 or 20pcs depending on the option selected. For different quantities, please email sales@motorsporthardware.com
- Converts 60 degree conical seat nuts to R13 ball seat
- Can be used with all Motorsport Hardware standard conical and extended race nuts
- Can be used with all thread sizes: 12×1.5, 14×1.5, and 14×1.25
- Inserts between wheel and conical nut
- Manufactuered from hardended steel
- Zinc plated
- Outer diameter: 22.8mm, Inner diameter: 15.2mm, Height: 6.3mm
Tips for use:
- To ensure safe use, when installing, make sure that you get at least 6.5turns when tightening nut
- Re-check torque after first 20-100 miles of service and re-torque as required to 85-88ft/lbs
| Weight | 4 lbs |
|---|---|
| Kit Options | 16 pcs – 4-Lug, 20 pcs – 5-Lug |
1 review for Conical seat to Ball seat Adapter
Add a review
You must be logged in to post a review.
Related products
Audi/VW Race / Locks / Specialty Nuts
$18.00
Sale!
CLEARANCE
Audi/VW Race / Locks / Specialty Nuts
$20.00
New
Audi/VW Race / Locks / Specialty Nuts
$38.00
$98.00 – $108.00
igorkershteyn (verified owner) –
These Conical seat to Ball seat Adapters are just ingenious solution if you would like to convert from OE bolts to stud/tuner nuts. Since there are just no tuner lugnuts for OE VW/Audi alloys with ball seat, these adapters are perfect! Thank you, Motorsport Hardware!